If you have a driveway or some other type of paved surface that needs to be replaced, you may want to consider Asphalt Paving. The pavement option is more durable and resistant to wear and tear than traditional stone and other material options. It has the versatility to fit into all types of budgets and has many attractive features. If you consider asphalt paving as a replacement for your existing driveway, here are some tips to keep in mind before you get started.
Asphalt paving is much better for the environment, appearance, overall driveability, and your budget. Asphalt pavement looks better, lasts much longer, and is typically easier to install. Most people don’t think about all of the advantages of using asphalt pavement and just taking regular concrete and roads for granted. While concrete has some advantages, there are also many disadvantages, such as the high cost of concrete and the dangers of concrete.
When choosing an asphalt paving option, you first need to decide if you will be replacing the entire driveway, just the portion you need to pave over, or just the area directly under your current driveway. If you only need the additional space for extra parking, you can create a gravel parking lot to complement your new asphalt. If you need a completely new driveway, you can choose a concrete overlay or a pre-cast Sub base. Both options provide a solid surface for the installation of your new asphalt. Once the prep work is completed, you can begin the actual paving process.
The actual paving process involves two steps: laying the aggregate layer and applying the hot mix asphalt. When laying the aggregate layer, make sure it is placed on a sloping driveway. The reason is that with regular concrete or asphalt, the slope would create cracks that would allow water into the cracks and possibly cause the cracking to expand. With the gravel parking lot idea, the gravel is laid directly on the ground.
This is done with the help of a roller. You will need at least two people to lift the heavy asphalt concrete piece and place it onto the slope. Once the concrete is in place, the next step is to apply the asphalt concrete mix. This is done by sweeping the mixture on the surface with a minimum of four passes. Then, you will use the hot mix asphalt concrete to the concrete’s remaining exposed surfaces, ensuring it is fully covered.
If you are concerned about the cracking process, you can still get your driveway paved using a hot mix asphalt product. Asphalt hot mix products are less expensive than standard concrete or asphalt, and they provide a higher degree of crack protection. However, it is essential to realize that the cost savings are less costly in the long run when you compare the cost of paving damaged concrete to the cost of paving new concrete. The amount of time and effort required to repair cracked concrete is more significant as well.
For asphalt pavements to last for years, they must be adequately maintained. The hot mix can become dirty and lose its effectiveness if it is not washed regularly. If you live in an area where snowfall is common, it is best to have the pavement heated before installing the paving. You can also apply chemicals to the pavement to protect it from freezing and extend its life.
Asphalt paving can be completed faster than concrete. It is typically used for driveways, sidewalks, and roads in urban areas because it is less costly. Several types of asphalt aggregate are available, including granular asphalt, expanded asphalt, and flash asphalt.